|
|
|
Products: Device Servers / Serial to Ethernet
Hardware Specifications
| Processor: |
ARM 7 TDMI 50MHz |
| I/O controller: |
16C550C or compatible |
| Memory: |
8MB SDRAM, 1 MB Flash |
| Connector type: |
RJ45 for LAN, DSUB 9 female for serial Port |
Interface:
| LAN interface: |
Auto-detecting 10BaseT/100BaseTx |
| Protocols: |
TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS |
| Serial interface: |
RS232/422/485 switchable |
| No. of port: |
1, Speed up to 460 Kbps |
| Available Modes: |
RS232 full duplex
RS422 full duplex
RS485 4 wire, full duplex
RS485 2 wire, half duplex, with echo
RS485 2 wire, half duplex, without echo
|
| Signals: |
RS232: TxD, RxD, RTS/CTS, DTR, DSR, DCD, RI, GND
RS422: Tx+/-, Rx+/-, GND
RS485 2 wire Data+/-, GND
RS485 4 wire Tx+/-, Rx+/-, GND
|
| RS485 Data control: |
Controlled by ART (Automatic Receive Transmit control) or RTS |
Performance:
| Speed: |
Up to 460 Kbps |
| Parity: |
None, even, odd, space, mark |
| Data bits: |
5, 6, 7, 8 |
| Stop bits: |
1, 1.5, 2 |
| IRQ: |
None |
| I/O address: |
None |
Operating Modes:
| Driver Mode: |
VScom Driver for Windows NT 4.0, 2000, XP and 2003
Driver Mode creates virtual Com port
|
| TCP Raw Server: |
Raw data transfer over TCP/IP. Waits for incoming connections. |
| TCP Raw Client: |
Raw data transfer over TCP/IP. Connects to a host or device waiting for incoming connections. |
| TCP Advanced Settings: |
Special settings for user-defined modes |
| UDP Mode: |
Raw data transfer UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data. |
| Null Modem Tunnel: |
Connecting two NetCom used as virtual null modem cable |
Power and Environment:
| Power requirements: |
9 - 30V DC, 200mA @ 12V |
| Power supply Adapter: |
9V, 500mA |
| Dimension: |
73×115×27 mm3 (W×L×H)
73×121×27 mm3 with DB9 connector and ears
|
| Operating Temp: |
0ºC - 60ºC |
| Storage Temp: |
-20ºC - 85ºC |
| Case: |
SECC sheet metal (1mm) |
| Weight: |
0.2kg |
Special Features:
| Installation: |
Configuration utility automaticly finds NetCom devices in the network |
| Operating mode: |
Automatic mode switching between Driver and TCP RAW mode.
With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automaticly which mode should be used. |
| Configuration: |
Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP |
| SNMP: |
Special VScom MIB included |
| ART: |
Automatic Receive Transmit control for RS485 |
| DNS: |
Domain Name Server support |
| Serial interface: |
Serial Interface configurable with external switch |
| Firewall: |
Special precautions for Firewall environments |
| Firmware: |
Firmware update over WEB Browser, Telnet, ComPort |
| LEDs: |
LEDs for Power, Tx, Rx, LAN Link, LAN Speed |
Security:
| Password access: |
Every capabilities of configuration use the same password including SNMP V3 |
|
|
|
